Lợi thế của cấu trúc nhẹ không khó hiểu. Lấy một chiếc ô tô làm ví dụ, trọng lượng nhẹ hơn có thể mang lại khả năng xử lý tốt hơn và công suất do động cơ tạo ra có thể tạo ra khả năng tăng tốc cao hơn. Vì xe nhẹ nên khả năng tăng tốc khi xuất phát tốt hơn, quãng đường phanh khi phanh ngắn hơn. Lấy máy bay làm ví dụ. Nếu trọng lượng trở nên nhẹ hơn, hiệu suất nhiên liệu và khả năng chịu tải có thể được cải thiện.

To achieve lightweight, the macro level can be achieved by using lightweight materials, such as titanium alloys, aluminum alloys, magnesium alloys, ceramics, plastics, glass fiber or carbon fiber composite materials. At the micro level, the parts can be designed more compact and miniaturized by using materials such as high-strength structural steel, which contributes to weight reduction.

3D in brings the feasibility of achieving lightweight through structural design. Specifically, there are four main ways for 3D printing to achieve lightweight through structural design: hollow sandwich/thin-wall reinforced structure, hollow lattice structure, integrated structure realization, and special-shaped topology optimization structure.

Bốn cách để đạt được chức năng in 3D nhẹ

Approach 1: Hollow sandwich, thin-walled reinforced structure

Hollow sandwich and thin-walled reinforced structures are usually composed of thinner panels and thicker cores. Under bending load, the surface layer material mainly bears the tensile stress and the compressive stress, and the core material mainly bears the shear stress and part of the compressive stress. The sandwich structure has the advantages of light weight, high bending rigidity and strength, strong anti-instability ability, fatigue resistance, sound absorption and heat insulation.

In aviation, wind turbine blades, sports equipment, shipbuilding, train locomotives and other fields, a large number of sandwich structures are used to reduce weight.

If aluminum and titanium alloys are used as the skin and core material, this sandwich structure is called a metal sandwich structure. In the 3D printing process, PTJ Hardware uses a sandwich structure to achieve rapid and lightweight components. The designed sandwich structure is directly The tensile and compressive loads acting on the outer skin have a good dispersion effect, and thin-walled structures (such as wall thicknesses below 1mm) can also contribute to weight reduction; sandwich and similar structures can be used as radiators and applied to parts. Greatly increase the heat exchange area of the parts and improve the heat dissipation efficiency.

Approach 2: Hollow lattice structure

The hollow lattice structure can achieve the perfect balance of engineering strength, toughness, durability, statics, dynamic performance and manufacturing cost. Design and manufacture through a large number of periodic duplication of single cells, and adjust the mechanical properties of the structure such as strength and toughness by adjusting the relative density of the lattice, the shape, size, material and loading rate of the cell.

The three-dimensional hollow structure has a high degree of spatial symmetry, which can evenly decompose the external load, and ensure the load-mang capacity while achieving weight reduction. In addition to engineering requirements, the hollow lattice structure has space pores (the pore size is adjustable), which can facilitate the fusion of the human body (tissue) and the implant in the application of implants.

Hollow lattice unit design has high flexibility. According to the environment of use, lattice units with different shapes, sizes and porosities can be designed. Dongguan PTJ Hardware has made continuous attempts in this regard: In areas with high component strength requirements, adjust the density of the lattice unit to a larger value, and choose a hollow lattice unit with high structural strength; in areas with high component weight reduction requirements, Add a hollow lattice structure with a large lightweight range. The hollow structure can not only be arranged regularly, but also randomly distributed to form irregular pores. In addition, the hollow structure can also present a gradient transition arrangement of variable density and thickness to meet the overall gradient strength requirements of the component.

We found that it is interesting that a lot of our focus is on how the lattice structure achieves the strength and flexibility we need. Some very niche studies also include how to obtain the required “vulnerabilities”. Before, the British Lightweight Project Alliance was studying how to crush the lattice structure. The application scenario is that when the return space capsule enters the earth’s air layer, changes in pressure and speed pose great challenges to the mechanical structure of the capsule. The lattice structure of additive machining Ti-6AI-4V obtains an ultra-light density of 0.4k/cm3. Such a structure needs to be designed to be “crushed” under certain pressure. 3D printing has opened a new field for the realization of the mechanical performance of the hollow lattice unit.

Path 3: Realization of integrated structure

3D printing can integrate parts that were originally combined by multiple components. This not only realizes the integrated structure of the parts, but also avoids the connection structure (flanges, welds, etc.) that exist when the original multiple parts are combined. Help designers break through the constraints to achieve functional optimization design.

The realization of the integrated structure not only brings the advantages of light weight, but also reduces the need for assembly and opens up feasible space for enterprises to improve production efficiency. A typical case in this regard is GE’s continuous optimization, testing and re-optimization of its fuel injector design through more than 10 years of exploration, reducing the number of fuel injector parts from more than 20 to one. The integration of the structure through 3D printing not only improves the problem of easy overheating and carbon deposition of the fuel injector, but also increases the service life of the fuel injector by 5 times, and will improve the performance of the LEAP engine.

Path 4: Special-shaped topology optimization structure

Topology optimization is an important means to shorten the design process of additive manufacturing. Topology optimization is used to determine and remove materials that do not affect the rigidity of parts. The topology method determines the best material distribution in a certain design area: including boundary conditions, pretension, and loads.

Topology optimization redistributes materials for the original parts, and can often achieve functional optimization based on weight reduction requirements. The topologically optimized special-shaped structure is simulated and analyzed to complete the final modeling. These designs often cannot be processed by traditional processing methods, but can be achieved through 3D printing. Usually the 3D printed product and the parts manufactured by the traditional process still need to be assembled together, so the design of the combination of the two parts needs to be considered at the same time.

The four 3D printing structures introduced above are one of the directions to achieve mechanical lightweight. Realizing mechanical lightweight is a systematic project, from the design optimization and manufacturing of each key component to the development and application of lightweight materials. Indispensable on the road of lightweight exploration.

Liên kết đến bài viết này :Bốn cách để đạt được chức năng in 3D nhẹ

Tuyên bố Tái bản: Nếu không có hướng dẫn đặc biệt, tất cả các bài viết trên trang web này là bản gốc. Vui lòng ghi rõ nguồn để tái bản: https: //www.cncmachiningptj.com/,thanks!


Bốn cách để đạt được chức năng in 3D nhẹTấm kim loại, berili, thép cacbon, magiê, 3D in, độ chính xác Cơ khí CNC dịch vụ cho các ngành thiết bị nặng, xây dựng, nông nghiệp và thủy lực. Thích hợp cho nhựa và hiếm gia công hợp kim. Nó có thể biến các bộ phận có đường kính lên đến 15.7 inch. Các quy trình bao gồm gia công thụy sĩ, chuốt, tiện, phay, doa và ren. Nó cũng cung cấp đánh bóng kim loại, sơn, mài bề mặt và thân cây dịch vụ ép tóc. Phạm vi sản xuất lên đến 50,000 chiếc. Thích hợp cho vít, khớp nối, mang, bơm, bánhhộp đựng, máy sấy trống và thức ăn quay van Ứng dụng.PTJ sẽ cùng bạn lập chiến lược để cung cấp các dịch vụ hiệu quả nhất về chi phí nhằm giúp bạn đạt được mục tiêu của mình, Chào mừng bạn đến với Liên hệ với chúng tôi ( [email protected] ) trực tiếp cho dự án mới của bạn.

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *