Dữ liệu liên quan cho thấy thị trường khuôn nhựa hiện chiếm khoảng 30% toàn ngành khuôn mẫu, và tỷ trọng xuất nhập khẩu khuôn mẫu cao từ 50 đến 70%. Với sự phát triển nhanh chóng của máy móc, ô tô, thiết bị gia dụng, thông tin điện tử, vật liệu xây dựng và các ngành công nghiệp trụ cột khác của nền kinh tế quốc dân của Trung Quốc, tỷ trọng này sẽ tiếp tục tăng.

Khuôn nhựa chiếm tới 30% thị trường khuôn mẫu toàn bộ

Experts predict that the overall trend of the mold market is steady and upward. In the future mold market, the development speed of plastic molds will be higher than that of other molds, and the proportion in the mold industry will gradually increase.

Although plastic molds have become the most attractive cheese nowadays, cherries are delicious and difficult to plant. Due to the complex shape and flexible design of plastic parts, it has high requirements for mold materials, design level and processing equipment, and not everyone can easily get involved.

Experts believe that there is still a big gap between China and foreign countries, and the three major bottlenecks that restrict the development of the mold industry must be broken as soon as possible: one is to increase the research and development of plastic materials and injection molding technology; the other is that plastic mold companies should apply to the park Development and accelerating the integration of resources; third, the tooling level such as mold test results inspection must be kept up as soon as possible, otherwise the development of the plastic mold market will be restricted.

The plastics industry is one of the pillar industries of my country’s economy. Plastic hardware has become a new economic growth point for the plastics industry, especially for plastic molds. The market prospects are broad, but there are still shortcomings, and the technology needs further innovation.

As one of the pillar industries of my country’s light industry, the plastics industry has maintained a growth rate of more than 10% in recent years. In the plastic industry, the plastic hardware industry market is very active, becoming a new consumption hotspot and a new economic growth point. The plastic mold market has a considerable prospect, but it is far from the foreign technology level.

At present, my country’s molds need to break through the bottleneck restricting the development of the mold industry. Because with the rapid development of China’s pillar industries such as machinery, automobiles, home appliances, and building materials, plastic molds account for about 30% of the entire mold industry. However, due to the complex shapes of plastic mold parts, there are higher requirements for their design level. Therefore, the technical level of mold trial results inspection must be innovative to keep up with the development trend of the times, otherwise the development of plastic molds will be restricted.

The industry believes that mold manufacturing companies must improve their own technology if they want to break through the bottleneck. At the meeting of the State Council on the 26th, the Premier also stated that today’s technological revolution plays an extremely critical role in economic development and promotion of economic upgrading. Advocating mass entrepreneurship and innovation also uses innovative means to promote entrepreneurship.

Although the growth rate of mold exports has been greater than that of imports in recent years, the absolute amount of increase is still that imports are greater than exports, which has caused the mold foreign trade deficit to increase year by year. This situation has improved in 2006, and the deficit has decreased slightly. There are two main reasons for the increase in the foreign trade deficit of molds: First, the sustained and rapid development of the national economy, especially the rapid development of the automobile industry, has brought a strong demand for molds. Some high-end molds cannot be produced in China, so they have to be imported; but there are some. Molds can be produced domestically and are also imported. This is related to China’s current tariff policy and project approval system. The second is insufficient encouragement for mold exports. Now molds, like other electromechanical products, have an export tax rebate rate of only 13%, but not 17%.

With the rapid development of China’s plastics industry, especially engineering plastics, it is foreseeable that the development speed of China’s plastic mold industry will continue to be higher than the overall development speed of the mold industry, and the annual growth rate will remain at about 20% in the next few years.

Liên kết đến bài viết này :Khuôn nhựa chiếm tới 30% thị trường khuôn mẫu toàn bộ

Tuyên bố Tái bản: Nếu không có hướng dẫn đặc biệt, tất cả các bài viết trên trang web này là bản gốc. Vui lòng ghi rõ nguồn để tái bản: https: //www.cncmachiningptj.com/,thanks!


Khuôn nhựa chiếm tới 30% thị trường khuôn mẫu toàn bộTấm kim loại, berili, thép cacbon, magiê, in 3D, độ chính xác Cơ khí CNC dịch vụ cho các ngành thiết bị nặng, xây dựng, nông nghiệp và thủy lực. Thích hợp cho nhựa và hiếm gia công hợp kim. Nó có thể biến các bộ phận có đường kính lên đến 15.7 inch. Các quy trình bao gồm gia công thụy sĩ, chuốt, tiện, phay, doa và ren. Nó cũng cung cấp đánh bóng kim loại, sơn, mài bề mặt và thân cây dịch vụ ép tóc. Phạm vi sản xuất (bao gồm nhôm đúc chếtđúc khuôn kẽm) lên đến 50,000 miếng. Thích hợp cho vít, khớp nối, mang, bơm, bánhhộp đựng, máy sấy trống và thức ăn quay van Ứng dụng.PTJ sẽ cùng bạn lập chiến lược để cung cấp các dịch vụ hiệu quả nhất về chi phí nhằm giúp bạn đạt được mục tiêu của mình, Chào mừng bạn đến với Liên hệ với chúng tôi ( [email protected] ) trực tiếp cho dự án mới của bạn.

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *